CNC Linear DUST COLLECTION

Specifications for Dust collector

Dust Collector 3hp Cyclon

Intake hole size: 8"

Bag material: Plastic

Impeller size: 15 1/2" steel, riveted

Suction capacity: 1654 CFM @ 2.0" SP

Maxi static pressure (inches of water): 14.2"

Filter: 99.9% efficiency captures 0.2-2 micron dust particles

Filter surface area: 108 sq. ft.

Collection Drum: 55 gallons

Overall dimensions: 60-1/4" wide x 38-3/8" deep x 93 1/4" high

Base construction: Pre-formed steel

Motor: TEFC Class "F", 3 HP, single-phase, 220V

Amps: 22

Cycle/RPM: 60 Hertz/3450 RPM

CNC Linear DUST COLLECTION

CNC

Linear

CNC

Linear

Dust collection is always a major part of the CNC process, from the collector to the dust head. For best results it is necessary to place the CNC machine first in line with the collection hose. We recommend the hose to the dust head on the machine not to be less than 6" in diameter.

The dust head attaches to the Z axis extrusion, it has a viewing window near motor area for ease of tool change. The bottom half can be removed to accommodate tool change.

Return

Dust head sold separately

Additional viewing windows can be purchased separately

For information regarding Dust head contact chris@cnclinear.com